• Start
• Documentation
  • PostgreSQL
  • mnoGoSearch
  • Apache 2.4
  • FreeBSD handbook
  • FreeBSD Manual
  • FreeBSD Source
• Tools
• Search
• Protected Area

plain

FreeBSD manual

keyword 1 2 3 4 5 6 7 8 9 n l

download PDF document: gdbmtool.1.pdf

GDBMTOOL(1) GDBM User Reference GDBMTOOL(1)
NAME gdbmtool - examine and modify a GDBM database
SYNOPSIS gdbmtool [-lmNnqrs] [-b SIZE] [-c SIZE] [-f FILE] [--block-size=SIZE] [--cache-size=SIZE] [--file FILE] [--newdb] [--no-lock] [--no-mmap] [--norc] [--quiet] [--read-only] [--synchronize] [DBFILE] [COMMAND [; COMMAND...]]
gdbmtool [-Vh] [--help] [--usage] [--version]
DESCRIPTION The gdbmtool utility allows you to view and modify an existing GDBM database or to create a new one.
The DBFILE argument supplies the name of the database to open. If not supplied, the default name junk.gdbm is used instead. If the named database does not exist, it will be created. An existing database can be cleared (i.e. all records removed from it) using the --newdb option (see below).
Unless the -N (--norc) option is given, after startup gdbmtool looks for file named .gdbmtoolrc first in the current working directory, and, if not found there, in the home directory of the user who started the program. If found, this file is read and interpreted as a list of gdbmtool commands.
Then gdbmtool starts a loop, in which it reads commands from the standard input, executes them and prints the results on the standard output. If the standard input is attached to a console, the program runs in interactive mode.
The program terminates when the quit command is given, or end-of-file is detected on its standard input.
Commands can also be specified in the command line, after the DBFILE argument. In this case, they will be interpreted without attempting to read more commands from the standard input.
If several commands are supplied, they must be separated by semicolons (properly escaped or quoted, in order to prevent them from being interpreted by the shell).
A gdbmtool command consists of a command verb, optionally followed by one or more arguments, separated by any amount of white space. A command verb can be entered either in full or in an abbreviated form, as long as that abbreviation does not match any other verb.
Any sequence of non-whitespace characters appearing after the command verb forms an argument. If the argument contains whitespace or unprintable characters it must be enclosed in double quotes. Within double quotes the usual escape sequences are understood, as shown in the table below:
Escape Expansion \a Audible bell character (ASCII 7) \b Backspace character (ASCII 8)
In addition, a backslash immediately followed by the end-of-line character effectively removes that character, allowing to split long arguments over several input lines.
OPTIONS -b, --block-size=SIZE Set block size.
-c, --cache-size=SIZE Set cache size.
-f, --file=FILE Read commands from FILE, instead of from the standard input.
-l, --no-lock Disable file locking.
-m, --no-mmap Do not use mmap(2).
-n, --newdb Create the database, truncating it if it already exists.
-q, --quiet Don't print initial banner.
-r, --read-only Open database in read-only mode.
-s, --synchronize Synchronize to disk after each write.
-h, --help Print a short usage summary.
--usage Print a list of available options.
-V, --version Print program version
SHELL COMMANDS avail Print the avail list.
bucket NUM Print the bucket number NUM and set is as the current one.
cache Print the bucket cache.
close Close the currently open database.
count Print the number of entries in the database.
current Print the current bucket.
delete KEY Delete record with the given KEY.
export FILE-NAME [truncate] [binary|ascii] Export the database to the flat file FILE-NAME. This is equivalent to gdbm_dump(1).
This command will not overwrite an existing file, unless the truncate parameter is also given. Another optional parameter determines the type of the dump (*note Flat files::). By default, ASCII dump will be created.
fetch KEY Fetch and display the record with the given KEY.
first Fetch and display the first record in the database. Subsequent records can be fetched using the next command (see below).
hash KEY Compute and display the hash value for the given KEY.
header Print file header.
help or ? Print a concise command summary, showing each command letter and verb with its parameters and a short description of what it does. Optional arguments are enclosed in square brackets.
history Shows the command history list with line numbers. This command is available only if the program was compiled with GNU Readline.
history COUNT. Shows COUNT latest commands from the command history.
history N COUNT. Shows COUNT commands from the command history starting with Nth command.
import FILE-NAME [replace] [nometa] Import data from a flat dump file FILE-NAME. If the replace argument is given, any records with the same keys as the already existing ones will replace them. The nometa argument turns off restoring meta-information from the dump file.
list List the contents of the database.
next [KEY] Sequential access: fetch and display the next record. If the KEY is given, the record following the one with this key will be fetched.
open FILE Open the database file FILE. If successful, any previously open database is closed. Otherwise, if the operation fails, the currently opened database remains unchanged.
This command takes additional information from the variables open, lock, mmap, and sync. See the section VARIABLES, for a detailed description of these.
quit Close the database and quit the utility. be set by specifying variable name, optionally prefixed with no, to set it to false.
snapshot FILE FILE Analyzes two database snapshots and selects the most recent of them. In case of error, prints a detailed diagnostics. Use this command to manually recover from a crash. For details, please refer to the chapter Crash Tolerance in the GDBM manual.
source FILE Read commands from the given FILE.
status Print current program status.
store KEY DATA Store the DATA with the given KEY in the database. If the KEY already exists, its data will be replaced.
sync Synchronize the database file with the disk storage.
upgrade Upgrade the database from the standard to the extended numsync format.
unset VARIABLE... Unsets listed variables.
version Print the version of gdbm.
DATA DEFINITIONS The define statement provides a mechanism for defining key or content structures. It is similar to the C struct declaration:
define key|content { defnlist }
The defnlist is a comma-separated list of member declarations. Within defnlist the newline character looses its special meaning as the command terminator, so each declaration can appear on a separate line and arbitrary number of comments can be inserted to document the definition.
Each declaration has one of the following formats
type name type name [N]
where type is a data type and name is the member name. The second format defines the member name as an array of N elements of type.
The supported types are:
type meaning char single byte (signed) short signed short integer ushort unsigned short integer int signed integer unsigned unsigned integer uint ditto stringz null-terminated string of characters
The following alignment declarations can be used within defnlist:
offset N The next member begins at offset N.
pad N Add N bytes of padding to the previous member.
For example:
define content { int status, pad 8, char id[3], stringz name }
To define data consisting of a single data member, the following simplified construct can be used:
define key|content type
where type is one of the types discussed above.
NOTE: The string type can reasonably be used only if it is the last or the only member of the data structure. That's because it provides no information about the number of elements in the array, so it is interpreted to contain all bytes up to the end of the datum.
VARIABLES confirm, boolean Whether to ask for confirmation before certain destructive operations, such as truncating the existing database. Default is true.
ps1, string Primary prompt string. Its value can contain conversion specifiers, consisting of the % character followed by another character. These specifiers are expanded in the resulting prompt as follows:
Sequence Expansion %f name of the db file %p program name %P package name (gdbm) %_ horizontal space (ASCII 32) %v program version %% %
The default prompt is %p>%_.
ps2, string Secondary prompt. See ps1 for a description of its value. This prompt is displayed before reading the second and subsequent lines of a multi-line command.
The default value is %_>%_.
A string used to delimit array items when printing a structured datum.
Default is , (a comma). This variable cannot be unset.
pager, string The name and command line of the pager program to pipe output to. This program is used in interactive mode when the estimated number of output lines is greater then the number of lines on your screen.
The default value is inherited from the environment variable PAGER. Unsetting this variable disables paging.
quiet, boolean Whether to display welcome banner at startup. This variable should be set in a startup script file.
The following variables control how the database is opened:
cachesize, numeric Sets the cache size. By default this variable is not set.
blocksize, numeric Sets the block size. Unset by default.
open, string Open mode. The following values are allowed:
newdb Truncate the database if it exists or create a new one. Open it in read-write mode.
wrcreat or rw Open the database in read-write mode. Create it if it does not exist. This is the default.
reader or readonly Open the database in read-only mode. Signal an error if it does not exist.
filemode, octal Sets the file mode for newly created database files. Default is 0644.
lock, boolean Lock the database. This is the default.
mmap, boolean Use memory mapping. This is the default.
coalesce, boolean When set, this option causes adjacent free blocks to be merged which allows for more efficient memory management at the expense of a certain increase in CPU usage.
centfree, boolean Enables central free block pool. This causes all free blocks of space to be placed in the global pool, thereby speeding up the allocation of data space.
COPYRIGHT Copyright (C) 2013-2021 Free Software Foundation, Inc License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.
GDBM August 1, 2021 GDBMTOOL(1)