FreeBSD manual
download PDF document: SSL_use_certificate_chain_file.3.pdf
SSL_CTX_USE_CERTIFICATE(3ossl) OpenSSL SSL_CTX_USE_CERTIFICATE(3ossl)
NAME
SSL_CTX_use_certificate, SSL_CTX_use_certificate_ASN1,
SSL_CTX_use_certificate_file, SSL_use_certificate,
SSL_use_certificate_ASN1, SSL_use_certificate_file,
SSL_CTX_use_certificate_chain_file, SSL_use_certificate_chain_file,
SSL_CTX_use_PrivateKey, SSL_CTX_use_PrivateKey_ASN1,
SSL_CTX_use_PrivateKey_file, SSL_CTX_use_RSAPrivateKey,
SSL_CTX_use_RSAPrivateKey_ASN1, SSL_CTX_use_RSAPrivateKey_file,
SSL_use_PrivateKey_file, SSL_use_PrivateKey_ASN1, SSL_use_PrivateKey,
SSL_use_RSAPrivateKey, SSL_use_RSAPrivateKey_ASN1,
SSL_use_RSAPrivateKey_file, SSL_CTX_check_private_key,
SSL_check_private_key, SSL_CTX_use_cert_and_key, SSL_use_cert_and_key -
load certificate and key data
SYNOPSIS
#include <openssl/ssl.h>
int SSL_CTX_use_certificate(SSL_CTX *ctx, X509 *x);
int SSL_CTX_use_certificate_ASN1(SSL_CTX *ctx, int len, const unsigned char *d);
int SSL_CTX_use_certificate_file(SSL_CTX *ctx, const char *file, int type);
int SSL_use_certificate(SSL *ssl, X509 *x);
int SSL_use_certificate_ASN1(SSL *ssl, const unsigned char *d, int len);
int SSL_use_certificate_file(SSL *ssl, const char *file, int type);
int SSL_CTX_use_certificate_chain_file(SSL_CTX *ctx, const char *file);
int SSL_use_certificate_chain_file(SSL *ssl, const char *file);
int SSL_CTX_use_PrivateKey(SSL_CTX *ctx, EVP_PKEY *pkey);
int SSL_CTX_use_PrivateKey_ASN1(int pk, SSL_CTX *ctx, const unsigned char *d,
long len);
int SSL_CTX_use_PrivateKey_file(SSL_CTX *ctx, const char *file, int type);
int SSL_CTX_use_RSAPrivateKey(SSL_CTX *ctx, RSA *rsa);
int SSL_CTX_use_RSAPrivateKey_ASN1(SSL_CTX *ctx, const unsigned char *d, long len);
int SSL_CTX_use_RSAPrivateKey_file(SSL_CTX *ctx, const char *file, int type);
int SSL_use_PrivateKey(SSL *ssl, EVP_PKEY *pkey);
int SSL_use_PrivateKey_ASN1(int pk, SSL *ssl, const unsigned char *d, long len);
int SSL_use_PrivateKey_file(SSL *ssl, const char *file, int type);
int SSL_use_RSAPrivateKey(SSL *ssl, RSA *rsa);
int SSL_use_RSAPrivateKey_ASN1(SSL *ssl, const unsigned char *d, long len);
int SSL_use_RSAPrivateKey_file(SSL *ssl, const char *file, int type);
int SSL_CTX_check_private_key(const SSL_CTX *ctx);
int SSL_check_private_key(const SSL *ssl);
int SSL_CTX_use_cert_and_key(SSL_CTX *ctx, X509 *x, EVP_PKEY *pkey, STACK_OF(X509) *chain, int override);
int SSL_use_cert_and_key(SSL *ssl, X509 *x, EVP_PKEY *pkey, STACK_OF(X509) *chain, int override);
DESCRIPTION
These functions load the certificates and private keys into the SSL_CTX
or SSL object, respectively.
The SSL_CTX_* class of functions loads the certificates and keys into
the SSL_CTX object ctx. The information is passed to SSL objects ssl
created from ctx with SSL_new(3) by copying, so that changes applied to
ctx do not propagate to already existing SSL objects.
the SSL_CTX_add_extra_chain_cert(3) function.
SSL_CTX_use_certificate_ASN1() loads the ASN1 encoded certificate from
the memory location d (with length len) into ctx,
SSL_use_certificate_ASN1() loads the ASN1 encoded certificate into ssl.
SSL_CTX_use_certificate_file() loads the first certificate stored in
file into ctx. The formatting type of the certificate must be specified
from the known types SSL_FILETYPE_PEM, SSL_FILETYPE_ASN1.
SSL_use_certificate_file() loads the certificate from file into ssl.
See the NOTES section on why SSL_CTX_use_certificate_chain_file()
should be preferred.
SSL_CTX_use_certificate_chain_file() loads a certificate chain from
file into ctx. The certificates must be in PEM format and must be
sorted starting with the subject's certificate (actual client or server
certificate), followed by intermediate CA certificates if applicable,
and ending at the highest level (root) CA.
SSL_use_certificate_chain_file() is similar except it loads the
certificate chain into ssl.
SSL_CTX_use_PrivateKey() adds pkey as private key to ctx.
SSL_CTX_use_RSAPrivateKey() adds the private key rsa of type RSA to
ctx. SSL_use_PrivateKey() adds pkey as private key to ssl;
SSL_use_RSAPrivateKey() adds rsa as private key of type RSA to ssl. If
a certificate has already been set and the private key does not belong
to the certificate an error is returned. To change a
[certificate/private-key] pair, the new certificate needs to be set
first with SSL_use_certificate() or SSL_CTX_use_certificate() before
setting the private key with SSL_CTX_use_PrivateKey() or
SSL_use_PrivateKey().
SSL_CTX_use_cert_and_key() and SSL_use_cert_and_key() assign the X.509
certificate x, private key key, and certificate chain onto the
corresponding ssl or ctx. The pkey argument must be the private key of
the X.509 certificate x. If the override argument is 0, then x, pkey
and chain are set only if all were not previously set. If override is
non-0, then the certificate, private key and chain certs are always
set. If pkey is NULL, then the public key of x is used as the private
key. This is intended to be used with hardware (via the ENGINE
interface) that stores the private key securely, such that it cannot be
accessed by OpenSSL. The reference count of the public key is
incremented (twice if there is no private key); it is not copied nor
duplicated. This allows all private key validations checks to succeed
without an actual private key being assigned via
SSL_CTX_use_PrivateKey(), etc.
SSL_CTX_use_PrivateKey_ASN1() adds the private key of type pk stored at
memory location d (length len) to ctx.
SSL_CTX_use_RSAPrivateKey_ASN1() adds the private key of type RSA
stored at memory location d (length len) to ctx.
SSL_use_PrivateKey_ASN1() and SSL_use_RSAPrivateKey_ASN1() add the
private key to ssl.
SSL_CTX_use_PrivateKey_file() adds the first private key found in file
to ctx. The formatting type of the private key must be specified from
the known types SSL_FILETYPE_PEM, SSL_FILETYPE_ASN1.
SSL_CTX_use_RSAPrivateKey_file() adds the first private RSA key found
in file to ctx. SSL_use_PrivateKey_file() adds the first private key
the RSA key/certificate pair will be checked. SSL_check_private_key()
performs the same check for ssl. If no key/certificate was explicitly
added for this ssl, the last item added into ctx will be checked.
NOTES
The internal certificate store of OpenSSL can hold several private
key/certificate pairs at a time. The certificate used depends on the
cipher selected, see also SSL_CTX_set_cipher_list(3).
When reading certificates and private keys from file, files of type
SSL_FILETYPE_ASN1 (also known as DER, binary encoding) can only contain
one certificate or private key, consequently
SSL_CTX_use_certificate_chain_file() is only applicable to PEM
formatting. Files of type SSL_FILETYPE_PEM can contain more than one
item.
SSL_CTX_use_certificate_chain_file() adds the first certificate found
in the file to the certificate store. The other certificates are added
to the store of chain certificates using SSL_CTX_add1_chain_cert(3).
Note: versions of OpenSSL before 1.0.2 only had a single certificate
chain store for all certificate types, OpenSSL 1.0.2 and later have a
separate chain store for each type.
SSL_CTX_use_certificate_chain_file() should be used instead of the
SSL_CTX_use_certificate_file() function in order to allow the use of
complete certificate chains even when no trusted CA storage is used or
when the CA issuing the certificate shall not be added to the trusted
CA storage.
If additional certificates are needed to complete the chain during the
TLS negotiation, CA certificates are additionally looked up in the
locations of trusted CA certificates, see
SSL_CTX_load_verify_locations(3).
The private keys loaded from file can be encrypted. In order to
successfully load encrypted keys, a function returning the passphrase
must have been supplied, see SSL_CTX_set_default_passwd_cb(3).
(Certificate files might be encrypted as well from the technical point
of view, it however does not make sense as the data in the certificate
is considered public anyway.)
All of the functions to set a new certificate will replace any existing
certificate of the same type that has already been set. Similarly all
of the functions to set a new private key will replace any private key
that has already been set. Applications should call
SSL_CTX_check_private_key(3) or SSL_check_private_key(3) as appropriate
after loading a new certificate and private key to confirm that the
certificate and key match.
RETURN VALUES
On success, the functions return 1. Otherwise check out the error
stack to find out the reason.
SEE ALSO
ssl(7), SSL_new(3), SSL_clear(3), SSL_CTX_load_verify_locations(3),
SSL_CTX_set_default_passwd_cb(3), SSL_CTX_set_cipher_list(3),
SSL_CTX_set_client_CA_list(3), SSL_CTX_set_client_cert_cb(3),
SSL_CTX_add_extra_chain_cert(3)
COPYRIGHT
3.0.11 2023-09-19 SSL_CTX_USE_CERTIFICATE(3ossl)