FreeBSD manual
download PDF document: pt.4.pdf
PT(4) FreeBSD Kernel Interfaces Manual PT(4)
NAME
pt - SCSI processor type driver
SYNOPSIS
device pt
DESCRIPTION
The pt driver provides support for a SCSI processor type device. These
are usually scanners and other devices using the SCSI link as a
communication interface with device specific commands embedded in the
data stream.
A SCSI adapter must be separately configured into the system before this
driver can be used.
This device supports read(2) and write(2), and the ioctl(2) calls
described below.
IOCTLS
The following ioctl(2) calls are supported by the pt driver. They are
defined in the header file <sys/ptio.h>.
PTIOCGETTIMEOUT This ioctl allows userland applications to fetch the
current pt driver read and write timeout. The value
returned is in seconds.
PTIOCSETTIMEOUT This ioctl allows userland applications to set the
current pt driver read and write timeouts. The value
should be in seconds.
FILES
/dev/ptN the Nth processor device.
SEE ALSO
cam(4)
HISTORY
The pt driver appeared in FreeBSD 2.1.
FreeBSD 14.0-RELEASE-p11 March 2, 1995 FreeBSD 14.0-RELEASE-p11