FreeBSD manual
download PDF document: sbp_targ.4.pdf
SBP_TARG(4) FreeBSD Kernel Interfaces Manual SBP_TARG(4)
NAME
sbp_targ - Serial Bus Protocol 2 (SBP-2) Target Mode devices driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
device sbp_targ
device firewire
device scbus
device targ
Alternatively, to load the driver as a module at boot time, place the
following lines in loader.conf(5):
firewire_load="YES"
cam_load="YES"
sbp_targ_load"YES"
DESCRIPTION
The sbp_targ driver provides support for SBP-2 target mode. This driver
is supposed to work with cam(4), targ(4) and firewire(4). You also need
to use scsi_target(8), which can be found in
/usr/share/examples/scsi_target, to provide actual devices.
EXAMPLES
# mdconfig -a -t malloc -s 10m
md0
# scsi_target 0:0:0 /dev/md0
(Assuming sbp_targ0 on scbus0)
SEE ALSO
cam(4), firewire(4), targ(4), camcontrol(8), fwcontrol(8), kldload(8),
scsi_target(8)
AUTHORS
The sbp_targ driver was written by Hidetoshi Shimokawa.
BUGS
This driver is currently under development. It does not work correctly
in multi-initiator environments or after the bus topology has been
changed.
FreeBSD 14.0-RELEASE-p11 November 7, 2003 FreeBSD 14.0-RELEASE-p11