FreeBSD manual
download PDF document: tbl.7.pdf
TBL(7) FreeBSD Miscellaneous Information Manual TBL(7)
NAME
tbl - tbl language reference for mandoc
DESCRIPTION
The tbl language formats tables. It is used within mdoc(7) and man(7)
pages. This manual describes the subset of the tbl language accepted by
the mandoc(1) utility.
Each table is started with a roff(7) TS macro, consist of at most one
line of Options, one or more Layout lines, one or more Data lines, and
ends with a TE macro. All input must be 7-bit ASCII.
Options
If the first input line of a table ends with a semicolon, it contains
case-insensitive options separated by spaces, tabs, or commas.
Otherwise, it is interpreted as the first Layout line.
The following options are available. Some of them require arguments
enclosed in parentheses:
allbox Draw a single-line box around each table cell.
box Draw a single-line box around the table. For GNU compatibility,
this may also be invoked with frame.
center Center the table instead of left-adjusting it. For GNU
compatibility, this may also be invoked with centre.
decimalpoint
Use the single-character argument as the decimal point with the n
layout key. This is a GNU extension.
delim Use the two characters of the argument as eqn(7) delimiters.
Currently unsupported.
doublebox
Draw a double-line box around the table. For GNU compatibility,
this may also be invoked with doubleframe.
expand Increase the width of the table to the current line length.
Currently ignored.
linesize
Draw lines with the point size given by the unsigned integer
argument. Currently ignored.
nokeep Allow page breaks within the table. This is a GNU extension and
currently ignored.
nospaces
Ignore leading and trailing spaces in data cells. This is a GNU
extension.
nowarn Suppress warnings about tables exceeding the current line length.
This is a GNU extension and currently ignored.
tab Use the single-character argument as a delimiter between data
physical input line.
Each layout line consists of one or more layout cell specifications,
optionally separated by whitespace. The following case-insensitive key
characters start a new cell specification:
c Center the string in this cell.
r Right-justify the string in this cell.
l Left-justify the string in this cell.
n Justify a number around its last decimal point. If no decimal point
is found in the number, it is assumed to trail the number.
s Horizontally span columns from the last non-s layout cell. It is an
error if a column span follows a _ or = cell, or comes first on a
layout line. The combined cell as a whole consumes only one cell of
the corresponding data line.
a Left-justify a string and pad with one space.
^ Vertically span rows from the last non-^ layout cell. It is an error
to invoke a vertical span on the first layout line. Unlike a
horizontal span, a vertical span consumes a data cell and discards
the content.
_ Draw a single horizontal line in this cell. This consumes a data
cell and discards the content. It may also be invoked with -.
= Draw a double horizontal line in this cell. This consumes a data
cell and discards the content.
Each cell key may be followed by zero or more of the following case-
insensitive modifiers:
b Use a bold font for the contents of this cell.
d Move content down to the last row of this vertical span. Currently
ignored.
e Make this column wider to match the maximum width of any other column
also having the e modifier.
f The next one or two characters select the font to use for this cell.
One-character font names must be followed by a blank or period. See
the roff(7) manual for supported font names.
i Use an italic font for the contents of this cell.
m Specify a cell start macro. This is a GNU extension and currently
unsupported.
p Set the point size to the following unsigned argument, or change it
by the following signed argument. Currently ignored.
v Set the vertical line spacing to the following unsigned argument, or
change it by the following signed argument. Currently ignored.
x After determining the width of all other columns, distribute the rest
of the line length among all columns having the x modifier.
z Do not use this cell for determining the width of this column.
| Draw a single vertical line to the right of this cell.
|| Draw a double vertical line to the right of this cell.
If a modifier consists of decimal digits, it specifies a minimum spacing
in units of n between this column and the next column to the right. The
default is 3. If there is a vertical line, it is drawn inside the
spacing.
Data
The data section follows the last Layout line. Each data line consists
of one or more data cells, delimited by tab characters.
If a data cell contains only the two bytes `\^', the cell above spans to
this row, as if the layout specification of this cell were ^.
If a data cell contains only the single character `_' or `=', a single or
double horizontal line is drawn across the cell, joining its neighbours.
If a data cell contains only the two character sequence `\_' or `\=', a
single or double horizontal line is drawn inside the cell, not joining
its neighbours. If a data line contains nothing but the single character
`_' or `=', a horizontal line across the whole table is inserted without
consuming a layout row.
In place of any data cell, a text block can be used. It starts with T{
at the end of a physical input line. Input line breaks inside the text
block neither end the text block nor its data cell. It only ends if T}
occurs at the beginning of a physical input line and is followed by an
end-of-cell indicator. If the T} is followed by the end of the physical
input line, the text block, the data cell, and the data line ends at this
point. If the T} is followed by the tab character, only the text block
and the data cell end, but the data line continues with the data cell
following the tab character. If T} is followed by any other character,
it does not end the text block, which instead continues to the following
physical input line.
EXAMPLES
String justification and font selection:
.TS
rb c lb
r ci l.
r center l
ri ce le
right c left
.TE
r center l
ri ce le
right c left
Some ports in OpenBSD 6.1 to show number alignment and line drawing:
.TS
Ruby:1.8.7.374
TeX Live:2015
.TE
+---------+-----------+
|software | version |
+---------+-----------+
| AFL 2.39b |
| Mutt 1.8.0 |
| Ruby 1.8.7.374 |
|TeX Live 2015 |
+---------------------+
Spans and skipping width calculations:
.TS
box tab(:);
lz s | rt
lt| cb| ^
^ | rz s.
left:r
l:center:
:right
.TE
+-----------+---+
|left | r |
|l | center | |
| | right |
+--+------------+
Text blocks, specifying spacings and specifying and equalizing column
widths, putting lines into individual cells, and overriding allbox:
.TS
allbox tab(:);
le le||7 lw10.
The fourth line:_:line 1
of this column:=:line 2
determines:_:line 3
the column width.:T{
This text is too wide to fit into a column of width 17.
T}:line 4
T{
No break here.
T}::line 5
.TE
+--------------------+-----------------------++-------------+
|The fourth line +-----------------------+| line 1 |
+--------------------+-----------------------++-------------+
|of this column +=======================+| line 2 |
+--------------------+-----------------------++-------------+
|determines | ------------------- || line 3 |
+--------------------+-----------------------++-------------+
|the column width. | This text is too || line 4 |
| | wide to fit into a || |
| | column of width 17. || |
+--------------------+-----------------------++-------------+
COMPATIBILITY
The mandoc(1) implementation of tbl doesn't support mdoc(7) and man(7)
macros and eqn(7) equations inside tables.
SEE ALSO
mandoc(1), man(7), mandoc_char(7), mdoc(7), roff(7)
M. E. Lesk, Tbl -- A Program to Format Tables, June 11, 1976.
HISTORY
The tbl utility, a preprocessor for troff, was originally written by M.
E. Lesk at Bell Labs in 1975. The GNU reimplementation of tbl, part of
the groff package, was released in 1990 by James Clark. A standalone tbl
implementation was written by Kristaps Dzonsons in 2010. This formed the
basis of the implementation that first appeared in OpenBSD 4.9 as a part
of the mandoc(1) utility.
AUTHORS
This tbl reference was written by Kristaps Dzonsons <kristaps@bsd.lv> and
Ingo Schwarze <schwarze@openbsd.org>.
BUGS
In -T utf8 output mode, heavy lines are drawn instead of double lines.
This cannot be improved because the Unicode standard only provides an
incomplete set of box drawing characters with double lines, whereas it
provides a full set of box drawing characters with heavy lines. It is
unlikely this can be improved in the future because the box drawing
characters are already marked in Unicode as characters intended only for
backward compatibility with legacy systems, and their use is not
encouraged. So it seems unlikely that the missing ones might get added
in the future.
FreeBSD 14.0-RELEASE-p11 September 18, 2021 FreeBSD 14.0-RELEASE-p11