FreeBSD manual
download PDF document: authpf-noip.8.pdf
AUTHPF(8) FreeBSD System Manager's Manual AUTHPF(8)
NAME
authpf, authpf-noip - authenticating gateway user shell
SYNOPSIS
authpf
authpf-noip
DESCRIPTION
authpf is a user shell for authenticating gateways. It is used to change
pf(4) rules when a user authenticates and starts a session with sshd(8)
and to undo these changes when the user's session exits. Typical use
would be for a gateway that authenticates users before allowing them
Internet use, or a gateway that allows different users into different
places. Combined with properly set up filter rules and secure switches,
authpf can be used to ensure users are held accountable for their network
traffic. It is meant to be used with users who can connect via ssh(1)
only, and requires the pf(4) subsystem and an fdescfs(5) file system
mounted at /dev/fd to be enabled.
authpf-noip is a user shell which allows multiple connections to take
place from the same IP address. It is useful primarily in cases where
connections are tunneled via the gateway system, and can be directly
associated with the user name. It cannot ensure accountability when
classifying connections by IP address; in this case the client's IP
address is not provided to the packet filter via the client_ip macro or
the authpf_users table. Additionally, states associated with the client
IP address are not purged when the session is ended.
To use either authpf or authpf-noip, the user's shell needs to be set to
/usr/sbin/authpf or /usr/sbin/authpf-noip.
authpf uses the pf.conf(5) syntax to change filter and translation rules
for an individual user or client IP address as long as a user maintains
an active ssh(1) session, and logs the successful start and end of a
session to syslogd(8). authpf retrieves the client's connecting IP
address via the SSH_CLIENT environment variable and, after performing
additional access checks, reads a template file to determine what filter
and translation rules (if any) to add, and maintains the list of IP
addresses of connected users in the authpf_users table. On session exit
the same rules and table entries that were added at startup are removed,
and all states associated with the client's IP address are purged.
Each authpf process stores its rules in a separate ruleset inside a pf(4)
anchor shared by all authpf processes. By default, the anchor name
"authpf" is used, and the ruleset names equal the username and PID of the
authpf processes as "username(pid)". The following rules need to be
added to the main ruleset /etc/pf.conf in order to cause evaluation of
any authpf rules:
nat-anchor "authpf/*"
rdr-anchor "authpf/*"
binat-anchor "authpf/*"
anchor "authpf/*"
The "/*" at the end of the anchor name is required for pf(4) to process
the rulesets attached to the anchor by authpf.
Filter and translation rules are stored in a file called authpf.rules.
This file will first be searched for in /etc/authpf/users/$USER/ and then
in /etc/authpf/. Only one of these files will be used if both are
present.
Per-user rules from the /etc/authpf/users/$USER/ directory are intended
to be used when non-default rules are needed on an individual user basis.
It is important to ensure that a user can not write or change these
configuration files.
The authpf.rules file must exist in one of the above locations for authpf
to run.
CONFIGURATION
Options are controlled by the /etc/authpf/authpf.conf file. If the file
is empty, defaults are used for all configuration options. The file
consists of pairs of the form name=value, one per line. Currently, the
allowed values are as follows:
anchor=name
Use the specified anchor name instead of "authpf".
table=name
Use the specified table name instead of "authpf_users".
USER MESSAGES
On successful invocation, authpf displays a message telling the user he
or she has been authenticated. It will additionally display the contents
of the file /etc/authpf/authpf.message if the file exists and is
readable.
There exist two methods for providing additional granularity to the
control offered by authpf - it is possible to set the gateway to
explicitly allow users who have authenticated to ssh(1) and deny access
to only a few troublesome individuals. This is done by creating a file
with the banned user's login name as the filename in /etc/authpf/banned/.
The contents of this file will be displayed to a banned user, thus
providing a method for informing the user that they have been banned, and
where they can go and how to get there if they want to have their service
restored. This is the default behaviour.
It is also possible to configure authpf to only allow specific users
access. This is done by listing their login names, one per line, in
/etc/authpf/authpf.allow. A group of users can also be indicated by
prepending "%" to the group name, and all members of a login class can be
indicated by prepending "@" to the login class name. If "*" is found on
a line, then all usernames match. If authpf is unable to verify the
user's permission to use the gateway, it will print a brief message and
die. It should be noted that a ban takes precedence over an allow.
On failure, messages will be logged to syslogd(8) for the system
administrator. The user does not see these, but will be told the system
is unavailable due to technical difficulties. The contents of the file
/etc/authpf/authpf.problem will also be displayed if the file exists and
is readable.
CONFIGURATION ISSUES
authpf maintains the changed filter rules as long as the user maintains
an active session. It is important to remember however, that the
this, since they are not secure. Also note that the various SSH
tunnelling mechanisms, such as AllowTcpForwarding and PermitTunnel,
should be disabled for authpf users to prevent them from circumventing
restrictions imposed by the packet filter ruleset.
authpf will remove state table entries that were created during a user's
session. This ensures that there will be no unauthenticated traffic
allowed to pass after the controlling ssh(1) session has been closed.
authpf is designed for gateway machines which typically do not have
regular (non-administrative) users using the machine. An administrator
must remember that authpf can be used to modify the filter rules through
the environment in which it is run, and as such could be used to modify
the filter rules (based on the contents of the configuration files) by
regular users. In the case where a machine has regular users using it,
as well as users with authpf as their shell, the regular users should be
prevented from running authpf by using the /etc/authpf/authpf.allow or
/etc/authpf/banned/ facilities.
authpf modifies the packet filter and address translation rules, and
because of this it needs to be configured carefully. authpf will not run
and will exit silently if the /etc/authpf/authpf.conf file does not
exist. After considering the effect authpf may have on the main packet
filter rules, the system administrator may enable authpf by creating an
appropriate /etc/authpf/authpf.conf file.
EXAMPLES
Control Files - To illustrate the user-specific access control
mechanisms, let us consider a typical user named bob. Normally, as long
as bob can authenticate himself, the authpf program will load the
appropriate rules. Enter the /etc/authpf/banned/ directory. If bob has
somehow fallen from grace in the eyes of the powers-that-be, they can
prohibit him from using the gateway by creating the file
/etc/authpf/banned/bob containing a message about why he has been banned
from using the network. Once bob has done suitable penance, his access
may be restored by moving or removing the file /etc/authpf/banned/bob.
Now consider a workgroup containing alice, bob, carol and dave. They
have a wireless network which they would like to protect from
unauthorized use. To accomplish this, they create the file
/etc/authpf/authpf.allow which lists their login ids, group prepended
with "%", or login class prepended with "@", one per line. At this
point, even if eve could authenticate to sshd(8), she would not be
allowed to use the gateway. Adding and removing users from the work
group is a simple matter of maintaining a list of allowed userids. If
bob once again manages to annoy the powers-that-be, they can ban him from
using the gateway by creating the familiar /etc/authpf/banned/bob file.
Though bob is listed in the allow file, he is prevented from using this
gateway due to the existence of a ban file.
Distributed Authentication - It is often desirable to interface with a
distributed password system rather than forcing the sysadmins to keep a
large number of local password files in sync. The login.conf(5)
mechanism in OpenBSD can be used to fork the right shell. To make that
happen, login.conf(5) should have entries that look something like this:
shell-default:shell=/bin/csh
default:\
staff:\
...
:shell=/bin/csh:\
:tc=default:
Using a default password file, all users will get authpf as their shell
except for root who will get /bin/csh.
SSH Configuration - As stated earlier, sshd(8) must be properly
configured to detect and defeat network attacks. To that end, the
following options should be added to sshd_config(5):
Protocol 2
ClientAliveInterval 15
ClientAliveCountMax 3
This ensures that unresponsive or spoofed sessions are terminated within
a minute, since a hijacker should not be able to spoof ssh keepalive
messages.
Banners - Once authenticated, the user is shown the contents of
/etc/authpf/authpf.message. This message may be a screen-full of the
appropriate use policy, the contents of /etc/motd or something as simple
as the following:
This means you will be held accountable by the powers that be
for traffic originating from your machine, so please play nice.
To tell the user where to go when the system is broken,
/etc/authpf/authpf.problem could contain something like this:
Sorry, there appears to be some system problem. To report this
problem so we can fix it, please phone 1-900-314-1597 or send
an email to remove@bulkmailerz.net.
Packet Filter Rules - In areas where this gateway is used to protect a
wireless network (a hub with several hundred ports), the default rule set
as well as the per-user rules should probably allow very few things
beyond encrypted protocols like ssh(1), ssl(8), or ipsec(4). On a
securely switched network, with plug-in jacks for visitors who are given
authentication accounts, you might want to allow out everything. In this
context, a secure switch is one that tries to prevent address table
overflow attacks.
Example /etc/pf.conf:
# by default we allow internal clients to talk to us using
# ssh and use us as a dns server.
internal_if="fxp1"
gateway_addr="10.0.1.1"
nat-anchor "authpf/*"
rdr-anchor "authpf/*"
binat-anchor "authpf/*"
block in on $internal_if from any to any
pass in quick on $internal_if proto tcp from any to $gateway_addr \
port = ssh
pass in quick on $internal_if proto udp from any to $gateway_addr \
port = domain
internal_if = "fxp0"
pass in log quick on $internal_if proto tcp from $user_ip to any
pass in quick on $internal_if from $user_ip to any
For a wireless or shared net - This example /etc/authpf/authpf.rules
could be used for an insecure network (such as a public wireless network)
where we might need to be a bit more restrictive.
internal_if="fxp1"
ipsec_gw="10.2.3.4"
# rdr ftp for proxying by ftp-proxy(8)
rdr on $internal_if proto tcp from $user_ip to any port 21 \
-> 127.0.0.1 port 8021
# allow out ftp, ssh, www and https only, and allow user to negotiate
# ipsec with the ipsec server.
pass in log quick on $internal_if proto tcp from $user_ip to any \
port { 21, 22, 80, 443 }
pass in quick on $internal_if proto tcp from $user_ip to any \
port { 21, 22, 80, 443 }
pass in quick proto udp from $user_ip to $ipsec_gw port = isakmp
pass in quick proto esp from $user_ip to $ipsec_gw
Dealing with NAT - The following /etc/authpf/authpf.rules shows how to
deal with NAT, using tags:
ext_if = "fxp1"
ext_addr = 129.128.11.10
int_if = "fxp0"
# nat and tag connections...
nat on $ext_if from $user_ip to any tag $user_ip -> $ext_addr
pass in quick on $int_if from $user_ip to any
pass out log quick on $ext_if tagged $user_ip
With the above rules added by authpf, outbound connections corresponding
to each users NAT'ed connections will be logged as in the example below,
where the user may be identified from the ruleset name.
# tcpdump -n -e -ttt -i pflog0
Oct 31 19:42:30.296553 rule 0.bbeck(20267).1/0(match): pass out on fxp1: \
129.128.11.10.60539 > 198.137.240.92.22: S 2131494121:2131494121(0) win \
16384 <mss 1460,nop,nop,sackOK> (DF)
Using the authpf_users table - Simple authpf settings can be implemented
without an anchor by just using the "authpf_users" table. For example,
the following pf.conf(5) lines will give SMTP and IMAP access to logged
in users:
table <authpf_users> persist
pass in on $ext_if proto tcp from <authpf_users> \
to port { smtp imap }
It is also possible to use the "authpf_users" table in combination with
anchors. For example, pf(4) processing can be sped up by looking up the
anchor only for packets coming from logged in users:
table <authpf_users> persist
appropriate to use authpf-noip to allow multiple users behind a NAT
gateway to connect. In the /etc/authpf/authpf.rules example below, the
remote user could tunnel a remote desktop session to their workstation:
internal_if="bge0"
workstation_ip="10.2.3.4"
pass out on $internal_if from (self) to $workstation_ip port 3389 \
user $user_id
FILES
/etc/authpf/authpf.conf
/etc/authpf/authpf.allow
/etc/authpf/authpf.rules
/etc/authpf/authpf.message
/etc/authpf/authpf.problem
SEE ALSO
pf(4), fdescfs(5), pf.conf(5), securelevel(7), ftp-proxy(8)
HISTORY
The authpf program first appeared in OpenBSD 3.1.
BUGS
Configuration issues are tricky. The authenticating ssh(1) connection
may be secured, but if the network is not secured the user may expose
insecure protocols to attackers on the same network, or enable other
attackers on the network to pretend to be the user by spoofing their IP
address.
authpf is not designed to prevent users from denying service to other
users.
FreeBSD 14.0-RELEASE-p11 January 29 2014 FreeBSD 14.0-RELEASE-p11