FreeBSD manual
download PDF document: bus_space_read_multi_stream_1.9.pdf
BUS_SPACE(9) FreeBSD Kernel Developer's Manual BUS_SPACE(9)
NAME
bus_space, bus_space_barrier, bus_space_copy_region_1,
bus_space_copy_region_2, bus_space_copy_region_4,
bus_space_copy_region_8, bus_space_copy_region_stream_1,
bus_space_copy_region_stream_2, bus_space_copy_region_stream_4,
bus_space_copy_region_stream_8, bus_space_free, bus_space_map,
bus_space_peek_1, bus_space_peek_2, bus_space_peek_4, bus_space_peek_8,
bus_space_poke_1, bus_space_poke_2, bus_space_poke_4, bus_space_poke_8,
bus_space_read_1, bus_space_read_2, bus_space_read_4, bus_space_read_8,
bus_space_read_multi_1, bus_space_read_multi_2, bus_space_read_multi_4,
bus_space_read_multi_8, bus_space_read_multi_stream_1,
bus_space_read_multi_stream_2, bus_space_read_multi_stream_4,
bus_space_read_multi_stream_8, bus_space_read_region_1,
bus_space_read_region_2, bus_space_read_region_4,
bus_space_read_region_8, bus_space_read_region_stream_1,
bus_space_read_region_stream_2, bus_space_read_region_stream_4,
bus_space_read_region_stream_8, bus_space_read_stream_1,
bus_space_read_stream_2, bus_space_read_stream_4,
bus_space_read_stream_8, bus_space_set_multi_1, bus_space_set_multi_2,
bus_space_set_multi_4, bus_space_set_multi_8,
bus_space_set_multi_stream_1, bus_space_set_multi_stream_2,
bus_space_set_multi_stream_4, bus_space_set_multi_stream_8,
bus_space_set_region_1, bus_space_set_region_2, bus_space_set_region_4,
bus_space_set_region_8, bus_space_set_region_stream_1,
bus_space_set_region_stream_2, bus_space_set_region_stream_4,
bus_space_set_region_stream_8, bus_space_subregion, bus_space_unmap,
bus_space_write_1, bus_space_write_2, bus_space_write_4,
bus_space_write_8, bus_space_write_multi_1, bus_space_write_multi_2,
bus_space_write_multi_4, bus_space_write_multi_8,
bus_space_write_multi_stream_1, bus_space_write_multi_stream_2,
bus_space_write_multi_stream_4, bus_space_write_multi_stream_8,
bus_space_write_region_1, bus_space_write_region_2,
bus_space_write_region_4, bus_space_write_region_8,
bus_space_write_region_stream_1, bus_space_write_region_stream_2,
bus_space_write_region_stream_4, bus_space_write_region_stream_8,
bus_space_write_stream_1, bus_space_write_stream_2,
bus_space_write_stream_4, bus_space_write_stream_8 - bus space
manipulation functions
SYNOPSIS
#include <machine/bus.h>
int
bus_space_map(bus_space_tag_t space, bus_addr_t address, bus_size_t size,
int flags, bus_space_handle_t *handlep);
void
bus_space_unmap(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t size);
int
bus_space_subregion(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, bus_size_t size, bus_space_handle_t *nhandlep);
int
bus_space_alloc(bus_space_tag_t space, bus_addr_t reg_start,
bus_addr_t reg_end, bus_size_t size, bus_size_t alignment,
int
bus_space_peek_1(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t *datap);
int
bus_space_peek_2(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t *datap);
int
bus_space_peek_4(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t *datap);
int
bus_space_peek_8(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t *datap);
int
bus_space_poke_1(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t *datap);
int
bus_space_poke_2(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t *datap);
int
bus_space_poke_4(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t *datap);
int
bus_space_poke_8(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t *datap);
uint8_t
bus_space_read_1(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset);
uint16_t
bus_space_read_2(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset);
uint32_t
bus_space_read_4(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset);
uint64_t
bus_space_read_8(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset);
uint8_t
bus_space_read_stream_1(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset);
uint16_t
bus_space_read_stream_2(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset);
uint32_t
bus_space_read_stream_4(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset);
bus_size_t offset, uint8_t value);
void
bus_space_write_2(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint16_t value);
void
bus_space_write_4(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint32_t value);
void
bus_space_write_8(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint64_t value);
void
bus_space_write_stream_1(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint8_t value);
void
bus_space_write_stream_2(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint16_t value);
void
bus_space_write_stream_4(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint32_t value);
void
bus_space_write_stream_8(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint64_t value);
void
bus_space_barrier(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, bus_size_t length, int flags);
void
bus_space_read_region_1(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t *datap, bus_size_t count);
void
bus_space_read_region_2(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint16_t *datap, bus_size_t count);
void
bus_space_read_region_4(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint32_t *datap, bus_size_t count);
void
bus_space_read_region_8(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint64_t *datap, bus_size_t count);
void
bus_space_read_region_stream_1(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint8_t *datap,
bus_size_t count);
void
bus_space_read_region_stream_2(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint16_t *datap,
bus_size_t count);
bus_space_read_region_stream_8(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint64_t *datap,
bus_size_t count);
void
bus_space_write_region_1(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint8_t *datap,
bus_size_t count);
void
bus_space_write_region_2(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint16_t *datap,
bus_size_t count);
void
bus_space_write_region_4(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint32_t *datap,
bus_size_t count);
void
bus_space_write_region_8(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint64_t *datap,
bus_size_t count);
void
bus_space_write_region_stream_1(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint8_t *datap,
bus_size_t count);
void
bus_space_write_region_stream_2(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint16_t *datap,
bus_size_t count);
void
bus_space_write_region_stream_4(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint32_t *datap,
bus_size_t count);
void
bus_space_write_region_stream_8(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint64_t *datap,
bus_size_t count);
void
bus_space_copy_region_1(bus_space_tag_t space,
bus_space_handle_t srchandle, bus_size_t srcoffset,
bus_space_handle_t dsthandle, bus_size_t dstoffset,
bus_size_t count);
void
bus_space_copy_region_2(bus_space_tag_t space,
bus_space_handle_t srchandle, bus_size_t srcoffset,
bus_space_handle_t dsthandle, bus_size_t dstoffset,
bus_size_t count);
void
bus_space_copy_region_4(bus_space_tag_t space,
bus_space_handle_t srchandle, bus_size_t srcoffset,
bus_size_t count);
void
bus_space_copy_region_stream_1(bus_space_tag_t space,
bus_space_handle_t srchandle, bus_size_t srcoffset,
bus_space_handle_t dsthandle, bus_size_t dstoffset,
bus_size_t count);
void
bus_space_copy_region_stream_2(bus_space_tag_t space,
bus_space_handle_t srchandle, bus_size_t srcoffset,
bus_space_handle_t dsthandle, bus_size_t dstoffset,
bus_size_t count);
void
bus_space_copy_region_stream_4(bus_space_tag_t space,
bus_space_handle_t srchandle, bus_size_t srcoffset,
bus_space_handle_t dsthandle, bus_size_t dstoffset,
bus_size_t count);
void
bus_space_copy_region_stream_8(bus_space_tag_t space,
bus_space_handle_t srchandle, bus_size_t srcoffset,
bus_space_handle_t dsthandle, bus_size_t dstoffset,
bus_size_t count);
void
bus_space_set_region_1(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t value, bus_size_t count);
void
bus_space_set_region_2(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint16_t value, bus_size_t count);
void
bus_space_set_region_4(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint32_t value, bus_size_t count);
void
bus_space_set_region_8(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint64_t value, bus_size_t count);
void
bus_space_set_region_stream_1(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint8_t value,
bus_size_t count);
void
bus_space_set_region_stream_2(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint16_t value,
bus_size_t count);
void
bus_space_set_region_stream_4(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint32_t value,
bus_size_t count);
void
bus_space_set_region_stream_8(bus_space_tag_t space,
void
bus_space_read_multi_2(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint16_t *datap, bus_size_t count);
void
bus_space_read_multi_4(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint32_t *datap, bus_size_t count);
void
bus_space_read_multi_8(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint64_t *datap, bus_size_t count);
void
bus_space_read_multi_stream_1(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint8_t *datap,
bus_size_t count);
void
bus_space_read_multi_stream_2(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint16_t *datap,
bus_size_t count);
void
bus_space_read_multi_stream_4(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint32_t *datap,
bus_size_t count);
void
bus_space_read_multi_stream_8(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint64_t *datap,
bus_size_t count);
void
bus_space_write_multi_1(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t *datap, bus_size_t count);
void
bus_space_write_multi_2(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint16_t *datap, bus_size_t count);
void
bus_space_write_multi_4(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint32_t *datap, bus_size_t count);
void
bus_space_write_multi_8(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint64_t *datap, bus_size_t count);
void
bus_space_write_multi_stream_1(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint8_t *datap,
bus_size_t count);
void
bus_space_write_multi_stream_2(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint16_t *datap,
bus_size_t count);
void
bus_size_t count);
void
bus_space_set_multi_1(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint8_t value, bus_size_t count);
void
bus_space_set_multi_2(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint16_t value, bus_size_t count);
void
bus_space_set_multi_4(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint32_t value, bus_size_t count);
void
bus_space_set_multi_8(bus_space_tag_t space, bus_space_handle_t handle,
bus_size_t offset, uint64_t value, bus_size_t count);
void
bus_space_set_multi_stream_1(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint8_t value,
bus_size_t count);
void
bus_space_set_multi_stream_2(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint16_t value,
bus_size_t count);
void
bus_space_set_multi_stream_4(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint32_t value,
bus_size_t count);
void
bus_space_set_multi_stream_8(bus_space_tag_t space,
bus_space_handle_t handle, bus_size_t offset, uint64_t value,
bus_size_t count);
DESCRIPTION
The bus_space functions exist to allow device drivers machine-independent
access to bus memory and register areas. All of the functions and types
described in this document can be used by including the <machine/bus.h>
header file.
Many common devices are used on multiple architectures, but are accessed
differently on each because of architectural constraints. For instance,
a device which is mapped in one system's I/O space may be mapped in
memory space on a second system. On a third system, architectural
limitations might change the way registers need to be accessed (e.g.
creating a non-linear register space). In some cases, a single driver
may need to access the same type of device in multiple ways in a single
system or architecture. The goal of the bus_space functions is to allow
a single driver source file to manipulate a set of devices on different
system architectures, and to allow a single driver object file to
manipulate a set of devices on multiple bus types on a single
architecture.
Not all buses have to implement all functions described in this document,
though that is encouraged if the operations are logically supported by
if appropriate. Machine-dependent types, variables, and functions should
be marked clearly in <machine/bus.h> to avoid confusion with the machine-
independent types and functions, and, if possible, should be given names
which make the machine-dependence clear.
CONCEPTS AND GUIDELINES
Bus spaces are described by bus space tags, which can be created only by
machine-dependent code. A given machine may have several different types
of bus space (e.g. memory space and I/O space), and thus may provide
multiple different bus space tags. Individual buses or devices on a
machine may use more than one bus space tag. For instance, ISA devices
are given an ISA memory space tag and an ISA I/O space tag.
Architectures may have several different tags which represent the same
type of space, for instance because of multiple different host bus
interface chipsets.
A range in bus space is described by a bus address and a bus size. The
bus address describes the start of the range in bus space. The bus size
describes the size of the range in bytes. Buses which are not byte
addressable may require use of bus space ranges with appropriately
aligned addresses and properly rounded sizes.
Access to regions of bus space is facilitated by use of bus space
handles, which are usually created by mapping a specific range of a bus
space. Handles may also be created by allocating and mapping a range of
bus space, the actual location of which is picked by the implementation
within bounds specified by the caller of the allocation function.
All of the bus space access functions require one bus space tag argument,
at least one handle argument, and at least one offset argument (a bus
size). The bus space tag specifies the space, each handle specifies a
region in the space, and each offset specifies the offset into the region
of the actual location(s) to be accessed. Offsets are given in bytes,
though buses may impose alignment constraints. The offset used to access
data relative to a given handle must be such that all of the data being
accessed is in the mapped region that the handle describes. Trying to
access data outside that region is an error.
Because some architectures' memory systems use buffering to improve
memory and device access performance, there is a mechanism which can be
used to create "barriers" in the bus space read and write stream. There
are three types of barriers: read, write, and read/write. All reads
started to the region before a read barrier must complete before any
reads after the read barrier are started. (The analogous requirement is
true for write barriers.) Read/write barriers force all reads and writes
started before the barrier to complete before any reads or writes after
the barrier are started. Correctly-written drivers will include all
appropriate barriers, and assume only the read/write ordering imposed by
the barrier operations.
People trying to write portable drivers with the bus_space functions
should try to make minimal assumptions about what the system allows. In
particular, they should expect that the system requires bus space
addresses being accessed to be naturally aligned (i.e., base address of
handle added to offset is a multiple of the access size), and that the
system does alignment checking on pointers (i.e., pointer to objects
being read and written must point to properly-aligned data).
The descriptions of the bus_space functions given below all assume that
from bus space (i.e., functions which do not obviously return an error
code) do not fail. They could only fail if given invalid arguments, and
in that case their behaviour is undefined. Functions which take a count
of bytes have undefined results if the specified count is zero.
TYPES
Several types are defined in <machine/bus.h> to facilitate use of the
bus_space functions by drivers.
bus_addr_t
The bus_addr_t type is used to describe bus addresses. It must be an
unsigned integral type capable of holding the largest bus address usable
by the architecture. This type is primarily used when mapping and
unmapping bus space.
bus_size_t
The bus_size_t type is used to describe sizes of ranges in bus space. It
must be an unsigned integral type capable of holding the size of the
largest bus address range usable on the architecture. This type is used
by virtually all of the bus_space functions, describing sizes when
mapping regions and offsets into regions when performing space access
operations.
bus_space_tag_t
The bus_space_tag_t type is used to describe a particular bus space on a
machine. Its contents are machine-dependent and should be considered
opaque by machine-independent code. This type is used by all bus_space
functions to name the space on which they are operating.
bus_space_handle_t
The bus_space_handle_t type is used to describe a mapping of a range of
bus space. Its contents are machine-dependent and should be considered
opaque by machine-independent code. This type is used when performing
bus space access operations.
MAPPING AND UNMAPPING BUS SPACE
This section is specific to the NetBSD version of these functions and may
or may not apply to the FreeBSD version.
Bus space must be mapped before it can be used, and should be unmapped
when it is no longer needed. The bus_space_map() and bus_space_unmap()
functions provide these capabilities.
Some drivers need to be able to pass a subregion of already-mapped bus
space to another driver or module within a driver. The
bus_space_subregion() function allows such subregions to be created.
bus_space_map(space, address, size, flags, handlep)
The bus_space_map() function maps the region of bus space named by the
space, address, and size arguments. If successful, it returns zero and
fills in the bus space handle pointed to by handlep with the handle that
can be used to access the mapped region. If unsuccessful, it will return
non-zero and leave the bus space handle pointed to by handlep in an
undefined state.
The flags argument controls how the space is to be mapped. Supported
flags include:
BUS_SPACE_MAP_CACHEABLE Try to map the space so that accesses can be
BUS_SPACE_MAP_LINEAR Try to map the space so that its contents can be
accessed linearly via normal memory access
methods (e.g. pointer dereferencing and
structure accesses). This is useful when
software wants to do direct access to a memory
device, e.g. a frame buffer. If this flag is
specified and linear mapping is not possible,
the bus_space_map() call should fail. If this
flag is not specified, the system may map the
space in whatever way is most convenient.
BUS_SPACE_MAP_NONPOSTED Try to map the space using non-posted device
memory. This is to support buses and devices
where mapping with posted device memory is
unsupported or broken. This flag is currently
only available on arm64.
Not all combinations of flags make sense or are supported with all
spaces. For instance, BUS_SPACE_MAP_CACHEABLE may be meaningless when
used on many systems' I/O port spaces, and on some systems
BUS_SPACE_MAP_LINEAR without BUS_SPACE_MAP_CACHEABLE may never work.
When the system hardware or firmware provides hints as to how spaces
should be mapped (e.g. the PCI memory mapping registers' "prefetchable"
bit), those hints should be followed for maximum compatibility. On some
systems, requesting a mapping that cannot be satisfied (e.g. requesting a
non-cacheable mapping when the system can only provide a cacheable one)
will cause the request to fail.
Some implementations may keep track of use of bus space for some or all
bus spaces and refuse to allow duplicate allocations. This is encouraged
for bus spaces which have no notion of slot-specific space addressing,
such as ISA, and for spaces which coexist with those spaces (e.g. PCI
memory and I/O spaces co-existing with ISA memory and I/O spaces).
Mapped regions may contain areas for which there is no device on the bus.
If space in those areas is accessed, the results are bus-dependent.
bus_space_unmap(space, handle, size)
The bus_space_unmap() function unmaps a region of bus space mapped with
bus_space_map(). When unmapping a region, the size specified should be
the same as the size given to bus_space_map() when mapping that region.
After bus_space_unmap() is called on a handle, that handle is no longer
valid. (If copies were made of the handle they are no longer valid,
either.)
This function will never fail. If it would fail (e.g. because of an
argument error), that indicates a software bug which should cause a
panic. In that case, bus_space_unmap() will never return.
bus_space_subregion(space, handle, offset, size, nhandlep)
The bus_space_subregion() function is a convenience function which makes
a new handle to some subregion of an already-mapped region of bus space.
The subregion described by the new handle starts at byte offset offset
into the region described by handle, with the size give by size, and must
be wholly contained within the original region.
If successful, bus_space_subregion() returns zero and fills in the bus
be used on the handle. Doing so may confuse any resource management
being done on the space, and will result in undefined behaviour. When
bus_space_unmap() or bus_space_free() is called on a handle, all
subregions of that handle become invalid.
ALLOCATING AND FREEING BUS SPACE
This section is specific to the NetBSD version of these functions and may
or may not apply to the FreeBSD version.
Some devices require or allow bus space to be allocated by the operating
system for device use. When the devices no longer need the space, the
operating system should free it for use by other devices. The
bus_space_alloc() and bus_space_free() functions provide these
capabilities.
bus_space_alloc(space, reg_start, reg_end, size, alignment, boundary,
flags, addrp, handlep)
The bus_space_alloc() function allocates and maps a region of bus space
with the size given by size, corresponding to the given constraints. If
successful, it returns zero, fills in the bus address pointed to by addrp
with the bus space address of the allocated region, and fills in the bus
space handle pointed to by handlep with the handle that can be used to
access that region. If unsuccessful, it returns non-zero and leaves the
bus address pointed to by addrp and the bus space handle pointed to by
handlep in an undefined state.
Constraints on the allocation are given by the reg_start, reg_end,
alignment, and boundary parameters. The allocated region will start at
or after reg_start and end before or at reg_end. The alignment
constraint must be a power of two, and the allocated region will start at
an address that is an even multiple of that power of two. The boundary
constraint, if non-zero, ensures that the region is allocated so that
first address in region / boundary has the same value as last address in
region / boundary. If the constraints cannot be met, bus_space_alloc()
will fail. It is an error to specify a set of constraints that can never
be met (for example, size greater than boundary).
The flags parameter is the same as the like-named parameter to
bus_space_map(), the same flag values should be used, and they have the
same meanings.
Handles created by bus_space_alloc() should only be freed with
bus_space_free(). Trying to use bus_space_unmap() on them causes
undefined behaviour. The bus_space_subregion() function can be used on
handles created by bus_space_alloc().
bus_space_free(space, handle, size)
The bus_space_free() function unmaps and frees a region of bus space
mapped and allocated with bus_space_alloc(). When unmapping a region,
the size specified should be the same as the size given to
bus_space_alloc() when allocating the region.
After bus_space_free() is called on a handle, that handle is no longer
valid. (If copies were made of the handle, they are no longer valid,
either.)
This function will never fail. If it would fail (e.g. because of an
argument error), that indicates a software bug which should cause a
panic. In that case, bus_space_free() will never return.
bus_space_read_1(space, handle, offset)
bus_space_read_2(space, handle, offset)
bus_space_read_4(space, handle, offset)
bus_space_read_8(space, handle, offset)
The bus_space_read_N() family of functions reads a 1, 2, 4, or 8 byte
data item from the offset specified by offset into the region specified
by handle of the bus space specified by space. The location being read
must lie within the bus space region specified by handle.
For portability, the starting address of the region specified by handle
plus the offset should be a multiple of the size of data item being read.
On some systems, not obeying this requirement may cause incorrect data to
be read, on others it may cause a system crash.
Read operations done by the bus_space_read_N() functions may be executed
out of order with respect to other pending read and write operations
unless order is enforced by use of the bus_space_barrier() function.
These functions will never fail. If they would fail (e.g. because of an
argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
bus_space_write_1(space, handle, offset, value)
bus_space_write_2(space, handle, offset, value)
bus_space_write_4(space, handle, offset, value)
bus_space_write_8(space, handle, offset, value)
The bus_space_write_N() family of functions writes a 1, 2, 4, or 8 byte
data item to the offset specified by offset into the region specified by
handle of the bus space specified by space. The location being written
must lie within the bus space region specified by handle.
For portability, the starting address of the region specified by handle
plus the offset should be a multiple of the size of data item being
written. On some systems, not obeying this requirement may cause
incorrect data to be written, on others it may cause a system crash.
Write operations done by the bus_space_write_N() functions may be
executed out of order with respect to other pending read and write
operations unless order is enforced by use of the bus_space_barrier()
function.
These functions will never fail. If they would fail (e.g. because of an
argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
PROBING BUS SPACE FOR HARDWARE WHICH MAY NOT RESPOND
One problem with the bus_space_read_N() and bus_space_write_N() family of
functions is that they provide no protection against exceptions which can
occur when no physical hardware or device responds to the read or write
cycles. In such a situation, the system typically would panic due to a
kernel-mode bus error. The bus_space_peek_N() and bus_space_poke_N()
family of functions provide a mechanism to handle these exceptions
gracefully without the risk of crashing the system.
In addition, explicit calls to the bus_space_barrier() function are not
required as the implementation will ensure all pending operations
complete before the peek or poke operation starts. The implementation
will also ensure that the peek or poke operations complete before
returning.
The return value indicates the outcome of the peek or poke operation. A
return value of zero implies that a hardware device is responding to the
operation at the specified offset in the bus space. A non-zero return
value indicates that the kernel intercepted a hardware exception (e.g.,
bus error) when the peek or poke operation was attempted. Note that some
busses are incapable of generating exceptions when non-existent hardware
is accessed. In such cases, these functions will always return zero and
the value of the data read by bus_space_peek_N() will be unspecified.
Finally, it should be noted that at this time the bus_space_peek_N() and
bus_space_poke_N() functions are not re-entrant and should not,
therefore, be used from within an interrupt service routine. This
constraint may be removed at some point in the future.
bus_space_peek_1(space, handle, offset, datap)
bus_space_peek_2(space, handle, offset, datap)
bus_space_peek_4(space, handle, offset, datap)
bus_space_peek_8(space, handle, offset, datap)
The bus_space_peek_N() family of functions cautiously read a 1, 2, 4, or
8 byte data item from the offset specified by offset in the region
specified by handle of the bus space specified by space. The data item
read is stored in the location pointed to by datap. It is permissible
for datap to be NULL, in which case the data item will be discarded after
being read.
bus_space_poke_1(space, handle, offset, value)
bus_space_poke_2(space, handle, offset, value)
bus_space_poke_4(space, handle, offset, value)
bus_space_poke_8(space, handle, offset, value)
The bus_space_poke_N() family of functions cautiously write a 1, 2, 4, or
8 byte data item specified by value to the offset specified by offset in
the region specified by handle of the bus space specified by space.
BARRIERS
In order to allow high-performance buffering implementations to avoid bus
activity on every operation, read and write ordering should be specified
explicitly by drivers when necessary. The bus_space_barrier() function
provides that ability.
bus_space_barrier(space, handle, offset, length, flags)
The bus_space_barrier() function enforces ordering of bus space read and
write operations for the specified subregion (described by the offset and
length parameters) of the region named by handle in the space named by
space.
The flags argument controls what types of operations are to be ordered.
Supported flags are:
BUS_SPACE_BARRIER_READ Synchronize read operations.
specified type(s) of operation done after the barrier.
Example: Consider a hypothetical device with two single-byte ports, one
write-only input port (at offset 0) and a read-only output port (at
offset 1). Operation of the device is as follows: data bytes are written
to the input port, and are placed by the device on a stack, the top of
which is read by reading from the output port. The sequence to correctly
write two data bytes to the device then read those two data bytes back
would be:
/*
* t and h are the tag and handle for the mapped device's
* space.
*/
bus_space_write_1(t, h, 0, data0);
bus_space_barrier(t, h, 0, 1, BUS_SPACE_BARRIER_WRITE); /* 1 */
bus_space_write_1(t, h, 0, data1);
bus_space_barrier(t, h, 0, 2,
BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE); /* 2 */
ndata1 = bus_space_read_1(t, h, 1);
bus_space_barrier(t, h, 1, 1, BUS_SPACE_BARRIER_READ); /* 3 */
ndata0 = bus_space_read_1(t, h, 1);
/* data0 == ndata0, data1 == ndata1 */
The first barrier makes sure that the first write finishes before the
second write is issued, so that two writes to the input port are done in
order and are not collapsed into a single write. This ensures that the
data bytes are written to the device correctly and in order.
The second barrier makes sure that the writes to the output port finish
before any of the reads to the input port are issued, thereby making sure
that all of the writes are finished before data is read. This ensures
that the first byte read from the device really is the last one that was
written.
The third barrier makes sure that the first read finishes before the
second read is issued, ensuring that data is read correctly and in order.
The barriers in the example above are specified to cover the absolute
minimum number of bus space locations. It is correct (and often easier)
to make barrier operations cover the device's whole range of bus space,
that is, to specify an offset of zero and the size of the whole region.
REGION OPERATIONS
Some devices use buffers which are mapped as regions in bus space.
Often, drivers want to copy the contents of those buffers to or from
memory, e.g. into mbufs which can be passed to higher levels of the
system or from mbufs to be output to a network. In order to allow
drivers to do this as efficiently as possible, the
bus_space_read_region_N() and bus_space_write_region_N() families of
functions are provided.
Drivers occasionally need to copy one region of a bus space to another,
or to set all locations in a region of bus space to contain a single
value. The bus_space_copy_region_N() family of functions and the
bus_space_set_region_N() family of functions allow drivers to perform
these operations.
bus_space_read_region_1(space, handle, offset, datap, count)
8 byte data items from bus space starting at byte offset offset in the
region specified by handle of the bus space specified by space and writes
them into the array specified by datap. Each successive data item is
read from an offset 1, 2, 4, or 8 bytes after the previous data item
(depending on which function is used). All locations being read must lie
within the bus space region specified by handle.
For portability, the starting address of the region specified by handle
plus the offset should be a multiple of the size of data items being read
and the data array pointer should be properly aligned. On some systems,
not obeying these requirements may cause incorrect data to be read, on
others it may cause a system crash.
Read operations done by the bus_space_read_region_N() functions may be
executed in any order. They may also be executed out of order with
respect to other pending read and write operations unless order is
enforced by use of the bus_space_barrier() function. There is no way to
insert barriers between reads of individual bus space locations executed
by the bus_space_read_region_N() functions.
These functions will never fail. If they would fail (e.g. because of an
argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
bus_space_write_region_1(space, handle, offset, datap, count)
bus_space_write_region_2(space, handle, offset, datap, count)
bus_space_write_region_4(space, handle, offset, datap, count)
bus_space_write_region_8(space, handle, offset, datap, count)
The bus_space_write_region_N() family of functions reads count 1, 2, 4,
or 8 byte data items from the array specified by datap and writes them to
bus space starting at byte offset offset in the region specified by
handle of the bus space specified by space. Each successive data item is
written to an offset 1, 2, 4, or 8 bytes after the previous data item
(depending on which function is used). All locations being written must
lie within the bus space region specified by handle.
For portability, the starting address of the region specified by handle
plus the offset should be a multiple of the size of data items being
written and the data array pointer should be properly aligned. On some
systems, not obeying these requirements may cause incorrect data to be
written, on others it may cause a system crash.
Write operations done by the bus_space_write_region_N() functions may be
executed in any order. They may also be executed out of order with
respect to other pending read and write operations unless order is
enforced by use of the bus_space_barrier() function. There is no way to
insert barriers between writes of individual bus space locations executed
by the bus_space_write_region_N() functions.
These functions will never fail. If they would fail (e.g. because of an
argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
bus_space_copy_region_1(space, srchandle, srcoffset, dsthandle, dstoffset,
count)
count)
The bus_space_copy_region_N() family of functions copies count 1, 2, 4,
or 8 byte data items in bus space from the area starting at byte offset
srcoffset in the region specified by srchandle of the bus space specified
by space to the area starting at byte offset dstoffset in the region
specified by dsthandle in the same bus space. Each successive data item
read or written has an offset 1, 2, 4, or 8 bytes after the previous data
item (depending on which function is used). All locations being read and
written must lie within the bus space region specified by their
respective handles.
For portability, the starting addresses of the regions specified by the
each handle plus its respective offset should be a multiple of the size
of data items being copied. On some systems, not obeying this
requirement may cause incorrect data to be copied, on others it may cause
a system crash.
Read and write operations done by the bus_space_copy_region_N() functions
may be executed in any order. They may also be executed out of order
with respect to other pending read and write operations unless order is
enforced by use of the bus_space_barrier() function. There is no way to
insert barriers between reads or writes of individual bus space locations
executed by the bus_space_copy_region_N() functions.
Overlapping copies between different subregions of a single region of bus
space are handled correctly by the bus_space_copy_region_N() functions.
These functions will never fail. If they would fail (e.g. because of an
argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
bus_space_set_region_1(space, handle, offset, value, count)
bus_space_set_region_2(space, handle, offset, value, count)
bus_space_set_region_4(space, handle, offset, value, count)
bus_space_set_region_8(space, handle, offset, value, count)
The bus_space_set_region_N() family of functions writes the given value
to count 1, 2, 4, or 8 byte data items in bus space starting at byte
offset offset in the region specified by handle of the bus space
specified by space. Each successive data item has an offset 1, 2, 4, or
8 bytes after the previous data item (depending on which function is
used). All locations being written must lie within the bus space region
specified by handle.
For portability, the starting address of the region specified by handle
plus the offset should be a multiple of the size of data items being
written. On some systems, not obeying this requirement may cause
incorrect data to be written, on others it may cause a system crash.
Write operations done by the bus_space_set_region_N() functions may be
executed in any order. They may also be executed out of order with
respect to other pending read and write operations unless order is
enforced by use of the bus_space_barrier() function. There is no way to
insert barriers between writes of individual bus space locations executed
by the bus_space_set_region_N() functions.
These functions will never fail. If they would fail (e.g. because of an
these types of devices as efficiently as possible, the
bus_space_read_multi_N(), bus_space_set_multi_N(), and
bus_space_write_multi_N() families of functions are provided.
bus_space_read_multi_1(space, handle, offset, datap, count)
bus_space_read_multi_2(space, handle, offset, datap, count)
bus_space_read_multi_4(space, handle, offset, datap, count)
bus_space_read_multi_8(space, handle, offset, datap, count)
The bus_space_read_multi_N() family of functions reads count 1, 2, 4, or
8 byte data items from bus space at byte offset offset in the region
specified by handle of the bus space specified by space and writes them
into the array specified by datap. Each successive data item is read
from the same location in bus space. The location being read must lie
within the bus space region specified by handle.
For portability, the starting address of the region specified by handle
plus the offset should be a multiple of the size of data items being read
and the data array pointer should be properly aligned. On some systems,
not obeying these requirements may cause incorrect data to be read, on
others it may cause a system crash.
Read operations done by the bus_space_read_multi_N() functions may be
executed out of order with respect to other pending read and write
operations unless order is enforced by use of the bus_space_barrier()
function. Because the bus_space_read_multi_N() functions read the same
bus space location multiple times, they place an implicit read barrier
between each successive read of that bus space location.
These functions will never fail. If they would fail (e.g. because of an
argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
bus_space_write_multi_1(space, handle, offset, datap, count)
bus_space_write_multi_2(space, handle, offset, datap, count)
bus_space_write_multi_4(space, handle, offset, datap, count)
bus_space_write_multi_8(space, handle, offset, datap, count)
The bus_space_write_multi_N() family of functions reads count 1, 2, 4, or
8 byte data items from the array specified by datap and writes them into
bus space at byte offset offset in the region specified by handle of the
bus space specified by space. Each successive data item is written to
the same location in bus space. The location being written must lie
within the bus space region specified by handle.
For portability, the starting address of the region specified by handle
plus the offset should be a multiple of the size of data items being
written and the data array pointer should be properly aligned. On some
systems, not obeying these requirements may cause incorrect data to be
written, on others it may cause a system crash.
Write operations done by the bus_space_write_multi_N() functions may be
executed out of order with respect to other pending read and write
operations unless order is enforced by use of the bus_space_barrier()
function. Because the bus_space_write_multi_N() functions write the same
bus_space_set_multi_1(space, handle, offset, value, count)
bus_space_set_multi_2(space, handle, offset, value, count)
bus_space_set_multi_4(space, handle, offset, value, count)
bus_space_set_multi_8(space, handle, offset, value, count)
The bus_space_set_multi_N() writes value into bus space at byte offset
offset in the region specified by handle of the bus space specified by
space, count times. The location being written must lie within the bus
space region specified by handle.
For portability, the starting address of the region specified by handle
plus the offset should be a multiple of the size of data items being
written and the data array pointer should be properly aligned. On some
systems, not obeying these requirements may cause incorrect data to be
written, on others it may cause a system crash.
Write operations done by the bus_space_set_multi_N() functions may be
executed out of order with respect to other pending read and write
operations unless order is enforced by use of the bus_space_barrier()
function. Because the bus_space_set_multi_N() functions write the same
bus space location multiple times, they place an implicit write barrier
between each successive write of that bus space location.
These functions will never fail. If they would fail (e.g. because of an
argument error), that indicates a software bug which should cause a
panic. In that case, they will never return.
STREAM FUNCTIONS
Most of the bus_space functions imply a host byte-order and a bus byte-
order and take care of any translation for the caller. In some cases,
however, hardware may map a FIFO or some other memory region for which
the caller may want to use multi-word, yet untranslated access. Access
to these types of memory regions should be with the
bus_space_*_stream_N() functions.
bus_space_read_stream_1()
bus_space_read_stream_2()
bus_space_read_stream_4()
bus_space_read_stream_8()
bus_space_read_multi_stream_1()
bus_space_read_multi_stream_2()
bus_space_read_multi_stream_4()
bus_space_read_multi_stream_8()
bus_space_read_region_stream_1()
bus_space_read_region_stream_2()
bus_space_read_region_stream_4()
bus_space_read_region_stream_8()
bus_space_write_stream_1()
bus_space_write_stream_2()
bus_space_write_stream_4()
bus_space_write_stream_8()
bus_space_write_multi_stream_1()
bus_space_write_multi_stream_2()
bus_space_write_multi_stream_4()
bus_space_write_multi_stream_8()
bus_space_write_region_stream_1()
bus_space_write_region_stream_2()
bus_space_set_multi_stream_2()
bus_space_set_multi_stream_4()
bus_space_set_multi_stream_8()
bus_space_set_region_stream_1()
bus_space_set_region_stream_2()
bus_space_set_region_stream_4()
bus_space_set_region_stream_8()
These functions are defined just as their non-stream counterparts, except
that they provide no byte-order translation.
COMPATIBILITY
The current NetBSD version of the bus_space interface specification
differs slightly from the original specification that came into wide use
and FreeBSD adopted. A few of the function names and arguments have
changed for consistency and increased functionality.
SEE ALSO
bus_dma(9)
HISTORY
The bus_space functions were introduced in a different form (memory and
I/O spaces were accessed via different sets of functions) in NetBSD 1.2.
The functions were merged to work on generic "spaces" early in the
NetBSD 1.3 development cycle, and many drivers were converted to use
them. This document was written later during the NetBSD 1.3 development
cycle, and the specification was updated to fix some consistency problems
and to add some missing functionality.
The manual page was then adapted to the version of the interface that
FreeBSD imported for the CAM SCSI drivers, plus subsequent evolution.
The FreeBSD bus_space version was imported in FreeBSD 3.0.
AUTHORS
The bus_space interfaces were designed and implemented by the NetBSD
developer community. Primary contributors and implementors were Chris
Demetriou, Jason Thorpe, and Charles Hannum, but the rest of the NetBSD
developers and the user community played a significant role in
development.
Justin Gibbs ported these interfaces to FreeBSD.
Chris Demetriou wrote this manual page.
Warner Losh modified it for the FreeBSD implementation.
BUGS
This manual may not completely and accurately document the interface, and
many parts of the interface are unspecified.
FreeBSD 14.0-RELEASE-p11 May 1, 2021 FreeBSD 14.0-RELEASE-p11