FreeBSD manual
download PDF document: intr_event_destroy.9.pdf
INTR_EVENT(9) FreeBSD Kernel Developer's Manual INTR_EVENT(9)
NAME
intr_event_add_handler, intr_event_create, intr_event_destroy,
intr_event_handle, intr_event_remove_handler, intr_priority - kernel
interrupt handler and thread API
SYNOPSIS
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/interrupt.h>
int
intr_event_add_handler(struct intr_event *ie, const char *name,
driver_filter_t filter, driver_intr_t handler, void *arg, u_char pri,
enum intr_type flags, void **cookiep);
int
intr_event_create(struct intr_event **event, void *source, int flags,
int irq, void (*pre_ithread)(void *), void (*post_ithread)(void *),
void (*post_filter)(void *), int (*assign_cpu)(void *, int),
const char *fmt, ...);
int
intr_event_destroy(struct intr_event *ie);
int
intr_event_handle(struct intr_event *ie, struct trapframe *frame);
int
intr_event_remove_handler(void *cookie);
u_char
intr_priority(enum intr_type flags);
DESCRIPTION
The interrupt event API provides methods to manage the registration and
execution of interrupt handlers and their associated thread contexts.
Each interrupt event in the system corresponds to a single hardware or
software interrupt source. Each interrupt event maintains a list of
interrupt handlers, sorted by priority, which will be invoked when
handling the event. An interrupt event will typically, but not always,
have an associated kthread(9), known as the interrupt thread. Finally,
each event contains optional callback functions which will be invoked
before and after the handler functions themselves.
An interrupt handler contains two distinct handler functions: the filter
and the thread handler. The filter function is run from interrupt
context and is intended to perform quick handling such as acknowledging
or masking a hardware interrupt, and queueing work for the ensuing thread
handler. Both functions are optional; each interrupt handler may choose
to register a filter, a thread handler, or both. Each interrupt handler
also consists of a name, a set of flags, and an opaque argument which
will be passed to both the filter and handler functions.
Handler Constraints
The filter function is executed inside a critical(9) section. Therefore,
filters may not yield the CPU for any reason, and may only use spin locks
locking(9). Any memory or zone allocations in an interrupt thread must
specify the M_NOWAIT flag, and any allocation errors must be handled.
The exception to these constraints is software interrupt threads, which
are allowed to sleep but should be allocated and scheduled using the
swi(9) interface.
Function Descriptions
The intr_event_create() function creates a new interrupt event. The
event argument points to a struct intr_event pointer that will reference
the newly created event upon success. The source argument is an opaque
pointer which will be passed to the pre_ithread, post_ithread, and
post_filter callbacks. The flags argument is a mask of properties of
this thread. The only valid flag currently for intr_event_create() is
IE_SOFT to specify that this interrupt thread is a software interrupt.
The enable and disable arguments specify optional functions used to
enable and disable this interrupt thread's interrupt source. The irq
argument is the unique interrupt vector number corresponding to the
event. The pre_ithread, post_ithread, and post_filter arguments are
callback functions that are invoked at different points while handling an
interrupt. This is described in more detail in the Handler Callbacks
section, below. They may be NULL to specify no callback. The assign_cpu
argument points to a callback function that will be invoked when binding
an interrupt to a particular CPU. It may be NULL if binding is
unsupported. The remaining arguments form a printf(9) argument list that
is used to build the base name of the new interrupt thread. The full
name of an interrupt thread is formed by concatenating the base name of
the interrupt thread with the names of all of its interrupt handlers.
The intr_event_destroy() function destroys a previously created interrupt
event by releasing its resources. An interrupt event can only be
destroyed if it has no handlers remaining.
The intr_event_add_handler() function adds a new handler to an existing
interrupt event specified by ie. The name argument specifies a name for
this handler. The filter argument provide the filter function to
execute. The handler argument provides the handler function to be
executed from the event's interrupt thread. The arg argument will be
passed to the filter and handler functions when they are invoked. The
pri argument specifies the priority of this handler, corresponding to the
values defined in <sys/priority.h>. It determines the order this handler
is called relative to the other handlers for this event, as well as the
scheduling priority of of the backing kernel thread. flags argument can
be used to specify properties of this handler as defined in <sys/bus.h>.
If cookiep is not NULL, then it will be assigned a cookie that can be
used later to remove this handler.
The intr_event_handle() function is the main entry point into the
interrupt handling code. It must be called from an interrupt context.
The function will execute all filter handlers associated with the
interrupt event ie, and schedule the associated interrupt thread to run,
if applicable. The frame argument is used to pass a pointer to the
struct trapframe containing the machine state at the time of the
interrupt. The main body of this function runs within a critical(9)
section.
The intr_event_remove_handler() function removes an interrupt handler
from the interrupt event specified by ie. The cookie argument, obtained
from intr_event_add_handler(), identifies the handler to remove.
that this handler cannot share an interrupt thread with another handler.
The INTR_MPSAFE flag specifies that this handler is MP safe in that it
does not need the Giant mutex to be held while it is executed. The
INTR_ENTROPY flag specifies that the interrupt source this handler is
tied to is a good source of entropy, and thus that entropy should be
gathered when an interrupt from the handler's source triggers.
Presently, the INTR_ENTROPY flag is not valid for software interrupt
handlers.
Handler Callbacks
Each struct intr_event is assigned three optional callback functions when
it is created: pre_ithread, post_ithread, and post_filter. These
callbacks are intended to be defined by the interrupt controller driver,
to allow for actions such as masking and unmasking hardware interrupt
signals.
When an interrupt is triggered, all filters are run to determine if any
threaded interrupt handlers should be scheduled for execution by the
associated interrupt thread. If no threaded handlers are scheduled, the
post_filter callback is invoked which should acknowledge the interrupt
and permit it to trigger in the future. If any threaded handlers are
scheduled, the pre_ithread callback is invoked instead. This handler
should acknowledge the interrupt, but it should also ensure that the
interrupt will not fire continuously until after the threaded handlers
have executed. Typically this callback masks level-triggered interrupts
in an interrupt controller while leaving edge-triggered interrupts alone.
Once all threaded handlers have executed, the post_ithread callback is
invoked from the interrupt thread to enable future interrupts. Typically
this callback unmasks level-triggered interrupts in an interrupt
controller.
RETURN VALUES
The intr_event_add_handler(), intr_event_create(), intr_event_destroy(),
intr_event_handle(), and intr_event_remove_handler() functions return
zero on success and non-zero on failure. The intr_priority() function
returns a process priority corresponding to the passed in interrupt
flags.
EXAMPLES
The swi_add(9) function demonstrates the use of intr_event_create() and
intr_event_add_handler().
int
swi_add(struct intr_event **eventp, const char *name, driver_intr_t handler,
void *arg, int pri, enum intr_type flags, void **cookiep)
{
struct intr_event *ie;
int error = 0;
if (flags & INTR_ENTROPY)
return (EINVAL);
ie = (eventp != NULL) ? *eventp : NULL;
if (ie != NULL) {
if (!(ie->ie_flags & IE_SOFT))
return (EINVAL);
} else {
error = intr_event_create(&ie, NULL, IE_SOFT, 0,
error = intr_event_add_handler(ie, name, NULL, handler, arg,
PI_SWI(pri), flags, cookiep);
}
return (error);
}
ERRORS
The intr_event_add_handler() function will fail if:
[EINVAL] The ie or name arguments are NULL.
[EINVAL] The handler and filter arguments are both NULL.
[EINVAL] The IH_EXCLUSIVE flag is specified and the interrupt
thread ie already has at least one handler, or the
interrupt thread ie already has an exclusive handler.
The intr_event_create() function will fail if:
[EINVAL] A flag other than IE_SOFT was specified in the flags
parameter.
The intr_event_destroy() function will fail if:
[EINVAL] The ie argument is NULL.
[EBUSY] The interrupt event pointed to by ie has at least one
handler which has not been removed with
intr_event_remove_handler().
The intr_event_handle() function will fail if:
[EINVAL] The ie argument is NULL.
[EINVAL] There are no interrupt handlers assigned to ie.
[EINVAL] The interrupt was not acknowledged by any filter and
has no associated thread handler.
The intr_event_remove_handler() function will fail if:
[EINVAL] The cookie argument is NULL.
SEE ALSO
critical(9), kthread(9), locking(9), malloc(9), swi(9), uma(9)
HISTORY
Interrupt threads and their corresponding API first appeared in
FreeBSD 5.0.
FreeBSD 14.0-RELEASE-p11 October 30, 2022 FreeBSD 14.0-RELEASE-p11