FreeBSD manual
download PDF document: fwip.4.pdf
FWIP(4) FreeBSD Kernel Interfaces Manual FWIP(4)
NAME
fwip - IP over FireWire driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
device firewire
device fwip
Alternatively, to load the driver as a module at boot time, place the
following lines in loader.conf(5):
firewire_load="YES"
if_fwip_load="YES"
DESCRIPTION
The fwip driver provides standard IP over FireWire (IEEE 1394) based on
the protocols described in RFC 2734 and RFC 3146.
The firewire(4) and fwohci(4) drivers must be configured in the kernel as
well.
This driver supports polling(4) as well if it is compiled with the
DEVICE_POLLING option.
SEE ALSO
arp(4), firewire(4), fwe(4), fwohci(4), netintro(4), polling(4),
ifconfig(8), kldload(8), sysctl(8)
HISTORY
The fwip device driver first appeared in FreeBSD 5.3.
AUTHORS
The fwip driver and this manual page were written by Doug Rabson, based
on earlier work by Hidetoshi Shimokawa.
BUGS
This driver currently does not support the MCAP protocol for multicast IP
over FireWire. Multicast packets are treated as broadcast packets which
is sufficient for most trivial uses of multicast.
FreeBSD 14.0-RELEASE-p11 July 16, 2005 FreeBSD 14.0-RELEASE-p11