FreeBSD manual
download PDF document: domain.9.pdf
DOMAIN(9) FreeBSD Kernel Developer's Manual DOMAIN(9)
NAME
domain, protosw - programming interface for kernel socket implementation
SYNOPSIS
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/protosw.h>
#include <sys/domain.h>
void
domain_add(struct domain *dom);
void
domain_remove(struct domain *dom);
void
DOMAIN_SET(domain);
int
protosw_register(struct domain *dom, struct protosw *pr);
int
protosw_unregister(struct protosw *pr);
DESCRIPTION
The domain subsystem allows implementation of communication protocols
that are exposed to the userland via the socket(2) API. When an
application performs a socket(domain, type, protocol) syscall, the kernel
searches for a domain matching the domain argument, then within this
domain, searches for a protocol matching type. If the third argument,
protocol, is not 0, that value must also match. The structure found must
implement certain methods, so that socket(2) API works for this
particular kind of a socket.
A minimal domain structure implementing a domain shall be initialized
with sparse C99 initializer and has public fields as follows:
struct domain {
/*
* Mandatory fields.
*/
int dom_family; /* PF_xxx, first argument of socket(2) */
char *dom_name; /* text name of the domain */
u_int dom_nprotosw; /* length of dom_protosw[] */
/*
* Following methods are optional.
*/
int (*dom_probe)(void); /* check for support */
struct rib_head *(*dom_rtattach)(uint32_t); /* init route table */
void (*dom_rtdetach)(struct rib_head *); /* clean up table */
void *(*dom_ifattach)(struct ifnet *); /* interface attach */
void (*dom_ifdetach)(struct ifnet *, void *);/* & detach callbacks */
int (*dom_ifmtu)(struct ifnet *); /* mtu change */
/*
* Mandatory variable size array of pointers to protosw structs.
*/
struct protosw *dom_protosw[];
are optional, but a meaningful protocol should implement some.
struct protosw {
short pr_type; /* second argument of socket(2) */
short pr_protocol; /* third argument of socket(2) or 0 */
short pr_flags; /* see protosw.h */
pr_soreceive_t *pr_soreceive; /* recv(2) */
pr_rcvd_t *pr_rcvd; /* soreceive_generic() if PR_WANTRCV */
pr_sosend_t *pr_sosend; /* send(2) */
pr_send_t *pr_send; /* send(2) via sosend_generic() */
pr_ready_t *pr_ready; /* sendfile/ktls readyness */
pr_sopoll_t *pr_sopoll; /* poll(2) */
pr_attach_t *pr_attach; /* creation: socreate(), sonewconn() */
pr_detach_t *pr_detach; /* destruction: sofree() */
pr_connect_t *pr_connect; /* connect(2) */
pr_disconnect_t *pr_disconnect; /* sodisconnect() */
pr_close_t *pr_close; /* close(2) */
pr_shutdown_t *pr_shutdown; /* shutdown(2) */
pr_abort_t *pr_abort; /* abrupt tear down: soabort() */
pr_aio_queue_t *pr_aio_queue; /* aio(9) */
pr_bind_t *pr_bind; /* bind(2) */
pr_bindat_t *pr_bindat; /* bindat(2) */
pr_listen_t *pr_listen; /* listen(2) */
pr_accept_t *pr_accept; /* accept(2) */
pr_connectat_t *pr_connectat; /* connectat(2) */
pr_connect2_t *pr_connect2; /* socketpair(2) */
pr_control_t *pr_control; /* ioctl(2) */
pr_rcvoob_t *pr_rcvoob; /* soreceive_rcvoob() */
pr_ctloutput_t *pr_ctloutput; /* control output (from above) */
pr_peeraddr_t *pr_peeraddr; /* getpeername(2) */
pr_sockaddr_t *pr_sockaddr; /* getsockname(2) */
pr_sense_t *pr_sense; /* stat(2) */
};
The following functions handle the registration of new domains and
protocols.
domain_add() adds a new protocol domain to the system. In most cases
domain_add() is not called directly, instead DOMAIN_SET() is used, which
is a wrapper around SYSINIT() macro. If the new domain has defined a
dom_probe routine, it is called first in domain_add() to determine if the
domain should be supported on the current system. If the probe routine
returns a non-0 value, then the domain will not be added. Once a domain
is added it cannot be completely unloaded. This is because there is no
reference counting system in place to determine if there are any active
references from sockets within that domain. However, the exprimental
domain_remove() exists, and unloadable domains may be supported in the
future.
protosw_register() dynamically adds a protocol to a domain, if the latter
has an empty slot in its dom_protosw. Dynamically added protocol can
later be unloaded with protosw_unregister().
RETURN VALUES
The domain_add() never fails, but it may not add a domain if its
dom_probe fails.
The protosw_register() function may fail if:
socket(2), SYSINIT(9)
HISTORY
The domain subsystem first appeared in 4.3BSD as the part of the very
first socket(2) API implementation.
The domain subsystem and this manual page were significantly rewritten in
FreeBSD 14.
AUTHORS
This manual page was written by Chad David <davidc@acns.ab.ca> and
Gleb Smirnoff <glebius@FreeBSD.org>.
FreeBSD 14.0-RELEASE-p11 September 14, 2022 FreeBSD 14.0-RELEASE-p11