FreeBSD manual
download PDF document: uio.9.pdf
UIO(9) FreeBSD Kernel Developer's Manual UIO(9)
NAME
uio, uiomove, uiomove_frombuf, uiomove_nofault - device driver I/O
routines
SYNOPSIS
#include <sys/types.h>
#include <sys/uio.h>
struct uio {
struct iovec *uio_iov; /* scatter/gather list */
int uio_iovcnt; /* length of scatter/gather list */
off_t uio_offset; /* offset in target object */
ssize_t uio_resid; /* remaining bytes to copy */
enum uio_seg uio_segflg; /* address space */
enum uio_rw uio_rw; /* operation */
struct thread *uio_td; /* owner */
};
int
uiomove(void *buf, int howmuch, struct uio *uiop);
int
uiomove_frombuf(void *buf, int howmuch, struct uio *uiop);
int
uiomove_nofault(void *buf, int howmuch, struct uio *uiop);
DESCRIPTION
The functions uiomove(), uiomove_frombuf(), and uiomove_nofault() are
used to transfer data between buffers and I/O vectors that might possibly
cross the user/kernel space boundary.
As a result of any read(2), write(2), readv(2), or writev(2) system call
that is being passed to a character-device driver, the appropriate driver
d_read or d_write entry will be called with a pointer to a struct uio
being passed. The transfer request is encoded in this structure. The
driver itself should use uiomove() or uiomove_nofault() to get at the
data in this structure.
The fields in the uio structure are:
uio_iov The array of I/O vectors to be processed. In the case of
scatter/gather I/O, this will be more than one vector.
uio_iovcnt The number of I/O vectors present.
uio_offset The offset into the device.
uio_resid The remaining number of bytes to process, updated after
transfer.
uio_segflg One of the following flags:
UIO_USERSPACE The I/O vector points into a process's address
space.
UIO_SYSSPACE The I/O vector points into the kernel address
space.
used if uio_segflg indicates that the transfer is to be made
from/to a process's address space.
The function uiomove_nofault() requires that the buffer and I/O vectors
be accessible without incurring a page fault. The source and destination
addresses must be physically mapped for read and write access,
respectively, and neither the source nor destination addresses may be
pageable. Thus, the function uiomove_nofault() can be called from
contexts where acquiring virtual memory system locks or sleeping are
prohibited.
The uiomove_frombuf() function is a convenience wrapper around uiomove()
for drivers that serve data which is wholly contained within an existing
buffer in memory. It validates the uio_offset and uio_resid values
against the size of the existing buffer, handling short transfers when
the request partially overlaps the buffer. When uio_offset is greater
than or equal to the buffer size, the result is success with no bytes
transferred, effectively signaling EOF.
RETURN VALUES
On success uiomove(), uiomove_frombuf(), and uiomove_nofault() will
return 0; on error they will return an appropriate error code.
EXAMPLES
The idea is that the driver maintains a private buffer for its data, and
processes the request in chunks of maximal the size of this buffer. Note
that the buffer handling below is very simplified and will not work (the
buffer pointer is not being advanced in case of a partial read), it is
just here to demonstrate the uio handling.
/* MIN() can be found there: */
#include <sys/param.h>
#define BUFSIZE 512
static char buffer[BUFSIZE];
static int data_available; /* amount of data that can be read */
static int
fooread(struct cdev *dev, struct uio *uio, int flag)
{
int rv, amnt;
rv = 0;
while (uio->uio_resid > 0) {
if (data_available > 0) {
amnt = MIN(uio->uio_resid, data_available);
rv = uiomove(buffer, amnt, uio);
if (rv != 0)
break;
data_available -= amnt;
} else
tsleep(...); /* wait for a better time */
}
if (rv != 0) {
/* do error cleanup here */
}
return (rv);
}
In addition, uiomove_nofault() will fail and return the following error
code if:
[EFAULT] A page fault occurs.
SEE ALSO
read(2), readv(2), write(2), writev(2), copyin(9), copyout(9), sleep(9)
HISTORY
The uio mechanism appeared in some early version of UNIX.
AUTHORS
This manual page was written by Jorg Wunsch.
FreeBSD 14.0-RELEASE-p11 March 11, 2017 FreeBSD 14.0-RELEASE-p11